Free shipping with 50$ orders

0

Your Cart is Empty

MSDS HCL 4%

1. Chemical Product And Company Information Chemical Name Trade Names Formula Molecular Weight CAS# UN# Hydrochloric Acid 4% w/w Muratic Acid HCl 192.13 Anhydrous) 7647-01-0 UN 1908 Uses: Consumer Commodity For the onsite generation of Chlorine Dioxide Manufacturer/Distributor Family Health Products INC.

2. Composition and Product Information: Concentration by Weight Hydrochloric Acid Water 4% CAS# 7647-01-0 96% CAS# 7732-18-5

3. Hazard Identification Emergency Overview: A clear, mostly odorless solution that can be hazardous in case of skin contact (irritant), of eye contact (irritant). Hazardous in case of ingestion . Routes of Entry: Inhalation, Skin Contact/absorption, Eye Contact or Ingestion Symptoms of Exposure: Inhalation: Aerosols and mists from solutions may cause mild to severe irritation of the nose and throat. Overexposure could cause coughing, sneezing, and labored breathing. Skin Contact/absorption: Can cause irritation of the skin. Acid may cause allergic contact dermatitis with repeated contact in sensitive individuals. Prolonged Contact can cause burns. Eye Contact: This solution can cause severe irritation to the eyes, with symptoms that include redness, tearing, and pain. Concentrated solutions may be corrosive to the eyes and cause corneal ulcerations.. Ingestion: May cause gastrointestinal irritation, with symptoms including nausea, diarrhea, vomiting, and abdominal pain.

4 . First Aid Measures Skin Wash the affected area with soap and water. If irritation develops, get medical attention. Eyes: Flush with water for a minimum of 15 minutes. If irritation persists seek medical attention. Inhalation: If irritation or other symptoms are experienced, remove victim to fresh air. If symptoms persist get medical attention. Ingestion: DO NOT INDUCE VOMITING. DO NOT GIVE ANYTHING BY MOUTH TO AN and give UNCONSCIOUS PERSON. Otherwise rinse mouth with water , Get medical attention immediately

5. Fire Fighting Measures Conditions Of Flammability: Does not burn Means To Extinguish: Not applicable Hazardous Combustion Products: None, does not burn. Flash Point & Method: Not applicable Upper Flammability Limit: Not applicable Lower Flammability Limit: Not applicable Auto-Ignition Temperature: Not applicable Mechanical Impact Sensitivity: Not applicable (water solution) Static Discharge Sensitivity: Not applicable (water solution) Special Remarks on Fire Hazards: Non combustible. Calcium carbide reacts with hydrogen chloride gas with incandescence. Uranium phosphide reacts withhydrochloric acid to release spontaneously flammable phosphine. Rubidium acetylene carbides burns with slightly warm hydrochloric acid. Lithium silicide in contact with hydrogen chloride becomes incandescent. When dilute hydrochloric acid is used, gas spontaneously flammable in air is evolved. Magnesium boride treated with concentrated hydrochloric acid produces spontaneously flammble gas. Cesium acetylene carbide burns hydrogen chloride gas. Cesium carbide ignites in contact with hydrochloric acid unless acid is dilute. Reacts with most metals to produce flammable Hydrodgen gas. (Hydrochloric Acid) Special Remarks on Explosion Hazards: Hydrogen chloride in contact with the following can cause an explosion, ignition on contact, or other violent/vigorous reaction: Acetic anhydride AgClO + CCl4 Alcohols + hydrogen cyanide, Aluminum Aluminum-titanium alloys (with HCl vapor), 2-Amino ethanol, Ammonium hydroxide, Calcium carbide Ca3P2 Chlorine + dinitroanilines (evolves gas), Chlorosulfonic acid Cesium carbide Cesium acetylene carbide, 1,1-Difluoroethylene Ethylene diamine Ethylene imine, Fluorine, HClO4 Hexalithium disilicide H2SO4 Metal acetylides or carbides, Magnesium boride, Mercuric sulfate, Oleum, Potassium permanganate, beta-Propiolactone Propylene oxide Rubidium carbide, Rubidium, acetylene carbide Sodium (with aqueous HCl), Sodium hydroxide Sodium tetraselenium, Sulfonic acid, Tetraselenium tetranitride, U3P4 , Vinyl acetate. Silver perchlorate with carbon tetrachloride in the presence of hydrochloric acid produces trichloromethyl perchlorate which detonates at 40 deg. C

6. Accidental Release Measures Leak Or Spill Procedures : Contain spills. Collect into clean high density polyethylene containers. Use lime or sodium bicarbonate to neutrilize acid. Wash away residues with large amounts of water.

7. Handling Storage Handling Procedures And Equipment : Use corrosion resistant tools and equipment. Avoid skin or clothing contact. 3 Storage: Store in a cool, dry area KEEP AWAY FROM BASES AND INCOMPATIBLE MATERIALS. (See sec 5)

8. Exposures Controls / Personal Protection Protective Equipment: Chemical safety goggles. Butyl rubber or neoprene gloves. Dust/mist mask in dusty or misty locations. Wear waterproof or washable outer clothing. Remove contaminated clothing. Engineering Controls: Use in well ventilated area.

9. Physical And Chemical Properties State: Liquid Odor:None Boiling Point: Depends on concentration 104°C Melting Point: Not applicable Freezing Point: Depends on concentration 0°C pH: .1-2 Appearance: Clear Solution, pale yellow Specific Gravity:1.24 @ 25°C 

10. Stability And Reactivity Chemical Stability: Stable in itself ,may ferment if left standing, may be reactive with bases. Reactivity : Avoid heat, moisture and incompatible materials. Incompatible Substances: Metal Nitrates, Strong Bases and Oxidizers., Corrosive to most metals Hazardous Decomposition Products: Carbon Dioxide and Carbon Monoxide.

11. Toxicological Information Inhalation: Aerosols and mists from solutions may cause mild to severe irritation of the nose and throat. Overexposure could cause coughing, sneezing, and labored breathing. Skin Contact/absorption: Can cause irritation of the skin. Acid may cause allergic contact dermatitis with repeated contact in sensitive individuals. Prolonged Contact can cause burns. Eye Contact: This solution can cause severe irritation to the eyes, with symptoms that include redness, tearing, and pain. Concentrated solutions may be corrosive to the eyes and cause corneal ulcerations.. Ingestion: May cause gastrointestinal irritation, with symptoms including nausea, diarrhea, vomiting, and abdominal pain LD50 37% HCl w/w: 700 mg/kg (rat) LD50 37% HCl w/w 5010mg/kg (Dormant Rabbit). LC50: Not Available Exposure Limits: Not available Irritancy: Severe (corrosive) Sensitization: Not reported as a human sensitizer. Carcinogenicity: Does not appear in reference lists. Teratogenicity & Mutagenicity: Does not apply to this product. No effects. Reproductive Toxicology : Does not appear in reference lists. Toxicological Synergism : Does not appear in reference lists.

12. Ecological Information Ecological Information: Not Established. May be harmful to plant growth. Low potential for bioaccumulation. Biodegradability: Naturally occuring Biodegradable Chemical. No Toxic products. LC50 37% HCl w/w: (fish1) 282 mg/l (LC50; 96 h) LC50 37% HCl w/w: (daphnia1) 56 mg/l (EC50; 72 h)

13. Disposal Considerations Disposal Considerations : Disposal of all wastes must be done in accordance with municipal, provincial and federal regulations. Avoid environmental release.

14. Transportation Information PROPER SHIPPING NAME: Hydrochloric Acid 4% UN NUMBER: 1789 CAS NUMBER: 7647-01-0 HAZMAT CLASS: Class 8 Corrosive PACKAGING CLASS: II

15. Regulatory Information (Hydrochloric Acid, 5% w/w) USA Regulations SARA Section 311/312 Hazard Classes Canada WHMIS Classification Class E - Corrosive Material

16. Other Information Prepared By: Kellen Harris - Family Health Products INC. Family Health Products INC. assumes no responsibility for injury to or death of the recipient of this material or third persons, or forany loss of damage, howsoever, caused, and the user, owner, bailee and their respective employees and agents assume all such risks if reasonable safety procedures are not adhered to. In addition, Family Health Products INC. assumes no responsibility for injury to or death of the recipient of this material or third persons, or for any loss or damage to any property, or for any consequential damage resulting from any abnormal user or theft of the material, and the user, owner, and their respective employees and agents assume all such risks even when caused by negligence, omission, default or error in judgement of Family Health Products INC. or its agents or servants. Each recipient should carefully review the information, data and recommendations in the specific context for which the product is to be used.

Subscribe

Sign up today